Need help?Do you have a question about the Cloud Z4II and is the answer not in the manual?
Guidelines for safe placement and operation of the unit to prevent damage or injury.
Declarations of compliance with relevant European EMC and electrical safety standards.
Important warnings regarding earthing, high voltages, and servicing procedures.
Welcome message and overview of the Z4il and Z8ll Zone Mixers' purpose and benefits.
Outlines the content and structure of the manual for user guidance.
Lists the items included with the Z4ll and Z8ll Zone Mixer packaging.
Highlights the key functionalities and capabilities of the Zone Mixers.
Description of an accessory for connecting two microphones remotely.
Details an accessory for remote mic/line input and music control.
Describes a remote plate for adjusting music level in a zone.
Details a remote plate for selecting music source and adjusting level.
Information on physical installation, rack mounting, and ventilation requirements.
Specifications and requirements for the unit's AC mains power input.
Details on the types and ratings of fuses used in the unit.
Guidance on connecting various audio sources to the mixer's line inputs.
Step-by-step instructions for wiring the DM-1 accessory.
Instructions for wiring the LM-1 accessory to a facility port.
Specifics on wiring PM series paging microphones.
Wiring guide for the RL-I remote control plate.
Configuration and adjustment of music sources connected to the mixer.
Setup and adjustment for microphone inputs, including gain and EQ.
Configuration and adjustment for the dedicated paging microphone input.
Configuration for microphone signals ducking music automatically.
Describes the highest priority given to paging microphone announcements.
Option for a specific line input to have priority over other music sources.
Logic for mixer microphones overriding remote input signals.
Installation advice for remote input plates.
Instructions for daisy-chaining DM-I units within a zone.
Using external systems to control music parameters via DC voltage.
A diagram illustrating a typical system setup using mixer features.
Technical specs for line input stage.
Technical specs for microphone input stage.
Technical specs for the facility port input.
Technical specs for the zone output stage.
Overall electrical and physical specifications of the units.
To Next Page
General
