Need help?Do you have a question about the Cloud Z8II and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| USB Interface | Yes |
| Effects Processor | Yes |
| Outputs | 2 |
| EQ | 3-band |
| Phantom Power | Yes |
General precautions for installing the unit safely to prevent hazards.
Product compliance with European EMC and electrical safety standards.
Important safety guidelines for operation and servicing the unit.
Warning about touching live terminals while power is supplied to the unit.
Information on the fuse in the IEC receptacle and replacement.
Instructions regarding user-serviceable parts and when to refer to qualified personnel.
Welcome and overview of the Cloud Zone Mixer's features and purpose.
Describes the manual's structure and content for Z4il and Z8ll models.
Lists the items included in the shipping carton for the Zone Mixer.
Highlights the key functionalities and specifications of the Zone Mixers.
Details the DM-I module for connecting microphones remotely to the mixer.
Describes the LM-1 module for mic/line inputs and remote music control.
Explains the RL-I plate for local music level adjustment in a zone.
Details the RSL-6 plate for music level and source selection.
Describes the Music Source selector and Music Level adjustment.
Details controls for Microphone 1, Microphone 2, and Paging Mic Level.
Explains Power button, Mute LED, Zone/Source labels, and rack mounting.
Details Line Inputs, Mic Inputs, Paging Mic Input, and Zone Outputs.
Covers Facility Port, Music Control Ports, switches, and mute input.
Describes the MAINS IEC connector and fuse replacement.
Details rack mounting, dimensions, and ventilation requirements.
Covers power input, fuse types, ratings, and replacement.
Explains connecting music sources, including mono/stereo and balanced inputs.
Describes connecting zone outputs to amplifiers, including balanced wiring.
Details wiring for amplifiers with unbalanced inputs.
Covers Mic 1, Mic 2, and Paging Mic inputs, phantom power, and EQ.
Explains Facility Port pinouts and connecting DM-1/LM-1 plates.
Details wiring for PM4/8/12/16 paging microphones to the mixer.
Describes connecting the PMI paging microphone to the mixer.
Explains wiring the RL-I plate to the Music Control Port.
Details wiring the RSL-6 plate for source and level control.
Explains connecting external systems for music muting.
Covers gain, level, and local/remote control for music inputs.
Details phantom power, gain, level, EQ, and high-pass filter for mics.
Explains phantom power for the paging mic input.
Covers gain, level, EQ, and high-pass filter for the paging mic.
Explains HF & LF EQ adjustments for each zone output.
Details Mic 1/2 priority, Paging mic priority, and Line 6 priority.
Explains priority for mics connected via Facility Port.
General guidelines for installing LM-1 and DM-1 plates.
Instructions for daisy-chaining multiple DM-I plates within a zone.
Describes using Facility Ports for direct balanced audio input.
General considerations for RL-1 and RSL-6 plates.
Explains controlling music source and level via external DC voltage.
Details DC voltages for selecting music sources via Music Control Port.
Lists compatible Bose EQ cards and installation procedure.
Illustrates a typical system setup using Zone Mixer features.
Details jumpers on the motherboard for phantom power and mute.
Explains zone-specific jumpers for music source, priority, and ducking.
Details PSU capacity and current consumption of optional devices.
Discusses EMC standards and potential interference issues.
Explains how to identify and prevent system hums from ground loops.
Details frequency response, distortion, sensitivity, and impedance for line inputs.
Covers mic input frequency response, phantom power, gain, and EQ.
Details specs for facility input and balanced zone outputs.
Provides power, fuse, dimensions, and weight details for Z4ii/Z8ii.
To Next Page
