CMC Airmaster Q1 User Manual

CMC NV – Airmaster Q1 Installation Guide – V1.0 – MANY1032A.EN.00
CMC NV, Industriezone Klein Frankrijk, Klein Frankrijkstraat 40, 9600 Ronse, Belgium
MANY1032A.EN.00
Airmaster Q1 hardware Installation Guide
Version 1.0
SAFETY WARNING
Do not operate the Airmaster Q1 until you and all personnel concerned have read
and understood this installation guide. Failure to follow instructions could result
in death or serious injury.
Important notes
This document serves as installation guide for all Airmaster Q1 products of CMC NV.
Installation and startup may only be done by trained personnel according to safe
engineering practices and with the observance of all relevant local health and safety
requirements and regulations.
A requirement of fault-free operation and fulfillment of any rights to claim under
guarantee is that the documentation is observed. In case of doubt please contact CMC.
This document could be subject to changes. Please contact our factory in case of doubt
in order to ensure that you have received the latest version.
The Airmaster Q1 is further referred to as the “controller”.
This document serves as a manual for the installation of the controller. Remark that the
controller always acts as a component of a complete system in which it is integrated. As
such other documentation for the installation related to the integration of the controller in
the complete system will have to be consulted as well. Reference to such other
documentation is not possible from within the scope of this document. Regardless of the
content of any other documentation, the content of this documentation needs to be fully
respected.

CMC Airmaster Q1 Specifications

General

Brand	CMC
Model	Airmaster Q1
Category	Controller
Language	English

Summary

Situation of the Product

Safety Guidelines

Safety Warning

Covers safety symbols and general warnings for safe operation.

Installation Safety

Details safe installation practices, qualified personnel, and electrical precautions.

Operation Safety

Outlines safe operation guidelines, environmental limits, and precautions.

Maintenance Safety

Specifies requirements for maintenance by qualified personnel and safe isolation.

Battery Safety

Provides warnings and instructions for battery handling, charging, and disposal.

Product Ratings

Connections and Protection

Earth Connection

Earthing connection procedures and requirements using Faston.

Power Connection

Details power supply specifications and connection for 24Vac.

Digital Inputs

Describes digital input connections and C-DI functionality.

Relay Connections

Covers relay protection, current limits, and cable temperature ratings.

Analog Inputs

Details three fixed analog inputs and their configurations.

Analog Output

Explains the analog output current range and impedance.

Communication Connections

Covers fixed and optional RS485 and Ethernet connections.

1-Phase Current Sensor

Connects to CMC-supplied Current Transformers (CTs) up to 20 mA.

3-Phase Current Sensor

Connects to CMC-supplied CTs up to 100 mA.

3-Phase Monitoring Inputs

Details protection by fuses and wiring for 3-phase monitoring.

Mounting Instructions