Replace Drawer Slides
Step 1: Use #2 Phillips drive to remove two screws at front
and back of drawer slide as shown.
Step 2: Replace drawer slides using the pre-located holes.
Use a new #10 undercut flathead screw to install the new
drawer slide.
800.338.2372 3www.cmecorp.com
Replace Drawers
Step 1: Press yellow button on each side of the drawer
slides
Step 2: Pull drawer straight out.
Step 3: Insert new drawer into drawer slide slots.
Go Slow, with even pressure on each side while inserting
the inner and outer drawer slide members
To Next Page
Loading...
Need help?
General