CMF SpinaLogic - Safe Battery Care Information; Replacing the Batteries

7
EN
Figure 2. Putting on the device
1. Place the device around the spot of your back surgery. (Figure 2).
2. Close and secure the belt.
LCD
PUSH BUTTON
Figure 3. Control Box
3. To start a treatment, press the “push button” below the liquid crystal
display (LCD) screen (Figure 3, above), hold it down until it beeps, and
then let go.
a. The treatment record will be displayed until it beeps.
b. The 30-minute treatment countdown will begin.
c. After 30 minutes, the “treatment complete” icon will appear
on the LCD screen, the device will beep twice, and it will
automatically shut off.