What to do if my CMi Paper Shredder motor does not work?
If the motor of your CMi Paper Shredder isn't working, there are a few things you can check: * First, ensure that the power cable, plug, and fuse are all functioning correctly. * If the motor protection mechanism has been triggered, remove any material causing the blockage and then press the reverse button.
Why is material not being pulled into my CMi C-ELH-2500/44 Paper Shredder?
If your CMi Paper Shredder isn't pulling in material, consider these possibilities: 1. The blade drum might be in reverse. To fix this, switch the shredder off, set the directional switch to the forward position, and then switch it back on. 2. The material might be too soft. Try using a piece of wood to push it through, or use drier branches and twigs. 3. The blade drum could be blocked. In this case, you'll need to eliminate the blockage.
What to do if chipped material is still attached in a chain-like manner in CMi C-ELH-2500/44 Paper Shredder?
If the chipped material from your CMi Paper Shredder is coming out in a chain-like manner, the pressure plate may not be adjusted correctly. You should adjust the pressure plate to resolve this issue.
General| Brand | CMi |
|---|---|
| Model | C-ELH-2500/44 |
| Category | Paper Shredder |
| Language | English |
To Next Page