36
GB
Please contact service department directly if you can-
not eliminate the error by yourself. Please remember
that repairs carried out by non-professionals will inva-
lidate your warranty claim and may cause additional
costs.
Technical data
*) The specified values are emission values and do not
necessarily represent safe workplace values. Although
there is a correlation between emission and immission
levels, this cannot be used to infer whether additional
safety measures are necessary or not. Factors which
affect the current immission levels at the workplace,
include the type of room, other sources of noise, e.g. the
number of machines operating and other processes
taking place in the vicinity. Permitted workplace values
can differ from country to country. This information is
designed to help the user to better assess the dangers
and risks.
Material to be cut is not pulled in. Blade drum is in reverse? Switch it off, switch the directional
switch to the forwards position,
switch on.
Material is too soft? Use wood to push through, or dry
branches and twigs.
Blade drum is blocked? Eliminate the blockage.
Chipped material is still attached
in a chain-like manner.
Pressure plate is not adjusted cor-
rectly?
Adjust the pressure plate.
Error/Fault Cause Remedy
Item number 214389
Nominal voltage 230 V ~ 50 Hz
Capacity 2500 W (P40)
Protection class II
Protection rating IPX4
Idle revolutions 60 min
-1
Maximum cutting dia-
meter
44 mm
Noise pressure level
(L
PA
)*
71.9 dB(A)
(K = 3 dB(A))
Noise output level
(L
WA
)*
93.8 dB(A)
(K = 2.44 dB(A))
Weight 17.5 kg
Note: The product is intended for use only
in properties having a mains current carry-
ing capacity of ≥100 A per phase and
being supplied by a distribution network
with a mains voltage of 230 V. If required,
contact the electricity company to ensure
that the mains current carrying capacity at
the connection point to the public power
grid is adequate for connecting the pro-
duct.
214389_Schredder_Elektrisch.book Seite 36 Dienstag, 13. April 2021 9:23 09
To Next Page
Loading...