EasyManua.ls Logo

CMi C-G-2800 C - Fuel and Lubricants to be Used

CMi C-G-2800 C
156 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52
GB
*) The specified values are emission values and do not nec-
essarily represent safe workplace values. Although there
is a correlation between emission and immission levels,
this cannot be used to infer whether additional safety
measures are necessary or not. Factors which affect the
current immission levels at the workplace include the
type of room, other sources of noise, e.g. the number of
devices operating and other processes taking place in
the vicinity. Permitted workplace values can differ from
country to country. This information is designed to help
the user to better assess the dangers and risks.
Fuel and lubricants to be used
Ordinary petrol, un-leaded, 91 octane
If there is no ordinary petrol available, a petrol
with a higher octane level may be used
Motor oil, SAE 10W-30
Tank volume 15 l
Maximum motor oil
quantity
0.6 l
Minimum motor oil
quantity
0.5 l
Operating time
achieved per tank filling
11 hours 50% load
Electrode spacing 0.7 mm to 0.8 mm
Replacement spark
plugs
BOSCH W7DC
W175T30
NGK BP6ES
LD F6TC
Noise output level
(L
WA
)*
96 dB(A)
k=3 dB(A)
Noise pressure level
(L
PA
)*
82 dB(A)
k=3 dB(A)
Dimensions
(length×width×height)
655 × 440 × 455 mm
Minimum distance to
buildings or connected
devices
1 m
Maximum ambient tem-
perature
40 °C
Maximum operating
height above zero level
1000 m
Weight (net)
Weight (total)
43 kg
45 kg
WARNING! Danger of fire! Prevent
damage from occurring due to leaking
fuel: Make sure the tank is completely
drained before disposing of the device.
106554_Generator_Benzin.book Seite 52 Montag, 21. November 2016 4:30 16

Table of Contents