To Next PageTo Next Page
Need help?Do you have a question about the CMi C-KGS-1450/210 and is the answer not in the manual?
Read and understand operating instructions before first use.
Read all safety warnings and instructions for future reference.
Keep work area clean and well lit. Do not operate in explosive atmospheres.
Power tool plugs must match the outlet. Never modify the plug.
Stay alert, watch what you are doing and use common sense.
Do not force the power tool. Use the correct power tool for your application.
Have your power tool serviced by a qualified repair person using only identical replacement parts.
Check the electrical tool for possible damage. Ensure safety equipment is functional.
Use a dust extraction facility. Make sure the workplace is well ventilated.
CAUTION! Risk of injury due to vibrations!...
Wear goggles and ear defenders when using the device.
List of items included with the chop and mitre saw.
On both sides of the workpiece stop there must be a gap of precisely 8 mm to the saw blade.
DANGER! Risk of injury! The product must only be put into operation if no defects are found.
The mitre angle can be set steplessly between -45° to 45°.
The incline angle can be set steplessly between 0° to 45°.
WARNING! Risk of injury! The saw blade is more easily accessible due to the severe inclination...
Check connecting cable for damage. Replace if damaged.
Press the release button (2) and carefully push the reciprocating protective hood (3) upwards.
DANGER! Risk of injury! The tensioning screw should not be tightened too tight.
Table listing malfunctions, causes, and remedies for common issues.
General