CMR versius - Page 17

Point-of-use preparation
Step 1 Moisten cable
(page 24)
Step 2 Transport cable
(page 26)
Initial manual cleaning
Step 1 Remove cable from container
(page 32)
Step 2 Brush cable
(page 32)
Step 3 Soak cable
(page 33)
Step 4 Rinse cable under cold running water
(page 34)
Proceed to main cleaning with ONE of the following methods:
Full manual cleaning continue to page 37
or
Automated cleaning
and thermal disinfection
continue to page 45
17
Reprocessing Versius Electrosurgery Instrument Cables