Procedures Overview
Main cleaning: Full manual cleaning
Step 1 Immerse cable in detergent (rst time)
(page 40)
Step 2 Brush cable under cold running water (rst time)
(page 41)
Step 3 Immerse cable in detergent (second time)
(page 41)
Step 4 Brush cable under cold running water (second time)
(page 42)
Step 5 Rinse cable under running critical water
(page 42)
Main cleaning: Automated cleaning and thermal disinfection
Step 1 Place cable into washer/disinfector tray
(page 48)
Step 2 Load tray into washer/disinfector
(page 48)
Step 3 Run washer/disinfector
(page 49)
Step 4 Remove cable from washer/disinfector
(page 50)
18
Reprocessing Versius Electrosurgery Instrument Cables
To Next Page
Loading...
