CNC-Step High-Z Series - 5 Connection Options of Optional Accessories; Overview Connection and Power Supply Via Zero-3 Control

Quick Start Guide
High-Z Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 10
Support: +49 (0)2831/91021-50
27.09.2013
Compressor
5 Connection options of optional accessories
The accessories at this point we just cover briefly the connection to the machine to the controller
and if necessary to the additional hardware interface (depending on the software).
For more detailed information please refer to the individual manuals.
5.1 Overview Connection and power supply via Zero-3 control
Milling motors
Noga spray cooling
Control signals
Zero-3 Back Side
Granitograv
Laser engraving unit
Converter / HF-spindle