6.3.3 Interaction w ith WinPC-NC
ConstruCam 3D transfers the finished milling data directly to WinPCNC. For this WinPC-NC must
be open in any case! This function must be set up once.
Click on the Direct Mill button and select "WinPCNC + DIN /
ISO".
The program now needs the WinPCNC path. This is normally
found automatically and only needs to be confirmed. Confirm
once the WinPCNC.exe and then the WinPCNC.
For further information, please refer to the help files in ConstruCam 3D.
6.4 Other Software
For special applications, it may be useful to use ConstruCam 3D "special software". This then
provides special functions.
e.g. Filou NC12 for plasma cutting (soft approaching of contours)
Filou DeskProto MultiAxis 6.1 for rotary axes
For further information, please refer to the respective documentation.
To Next Page
Loading...
