6 Software installation
6.1 KinetiC-NC
KinetiC-NC is the latest control software from CNC-STEP. The software can be found on the
included USB stick. The installation is carried out by running the setup file.
When you start the software for the first time, you will be asked for your machine type. Please
select one from the list. Everything else is well explained in the two manuals and in the online help
including instruction videos. These can be found in the software KinetiC-NC under "Help".
For full access to the software please log in the user "Customer Admin".
The default password is "1234".
No password is required for the default user with limited privileges.
6.1.1 CncPod
The software is combined with the hardware CncPod.
This has 2 LPT interfaces for controlling the machine and for optional accessories.
The connection to the PC is via network interface. The power supply is via USB Mini connector.
To Next Page
Loading...
