CO/Tech E0336WST4H4PR - Alarm and Snooze Functions

ENGLISH
11
Comfort indicator
The comfort indicator (8) shows thecomfort level, i.e. howthebody
perceives thecurrent combination of temperature and humidity.
Formost people anindoor environment feels most comfortable when
therelative humidity (RH) is at alevel of 40–70 %. The comfort level
is however merely aguide as therelationship between humidity and
comfort varies from person to person.
  
0–40 % RH
The humidity is
low
40–70 % RH
The humidity is
optimal
70–100 % RH
The humidity is
high
Alarm
Setting the alarm
1. In normal mode, hold in [ ALARM ] for 3 seconds to
enter thealarm settingmode.
2. Press or hold in [ ▲ ] or [ ▼ ] to change thevalue.
Confirm each stage with [ ALARM ].
3. Set thehours and minutes. Thealarm time will be saved and
thedisplay will return to displaying thecurrenttime.
Activating/Deactivating a programmed alarm
1. Press [ ALARM ] once to display theset alarmtime.
2. Press [ ALARM ] therequired number of times to activate/deactivate
thealarm. The symbol (11) will light up when thealarm is activated.
Activating the snooze function
When thealarm sounds: Press [ SNOOZE/LIGHT ] (21) to activate
thesnooze function. Thealarm will turn off, thesnooze symbol (9) will
begin to flash and thealarm will sound again after 5 minutes.
Turning off the alarm
When thealarm sounds: Press [ ALARM ] on theback of themainunit.
Thealarm is turned off and will sound at theset time on thenextday.