EasyManuals Logo

CO/Tech MDDG-20DEN7-QA3 User Manual

CO/Tech MDDG-20DEN7-QA3
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
ENGLISH
Theproduct must not be covered in any way. Make sure that no foreign objects cover
or block theair inlet/outlet. Blockages can lead to fires, electric shocks or damage to
theproduct.
Unplug theproduct when it is not in use.
Never use themains lead plug for turning theproduct on or off. Theproduct should only be
switched on and off using theon/off switch.
Before theproduct is moved, make sure it is switched off, unplugged and that thewater tank
is empty.
Never expose theproduct to running/splashing water or other liquids. Liquid coming in
contact with electrical components can be extremely hazardous.
Do not place theproduct where there is arisk of it falling into water or other liquids. Do not
place any objects that contain liquid on theproduct such as vases, drinks, etc.
Warning: When using therefrigerant R290.
Do not use any other agents than those recommended by themanufacturer for cleaning or to
speed up thedefrosting process.
Never use theproduct in areas where flammable liquids/materials or gases (petrol, solvents,
gas cylinders) are stored or used.
Make sure that there are no holes or burns on theproduct.
Be aware that refrigerants can be odourless.
Theproduct should be used in areas with afloor space greater than 4 m².
Safety regulations for service and repair work
Repairs must only be carried out by authorised service personnel and only using genuine spare parts.
1. Checks to the area
Prior to beginning work on systems containing flammable refrigerants, safety checks are necessary
to ensure that therisk of ignition is minimised. For repair to therefrigerating system, thefollowing
precautions shall be complied with prior to conducting work on thesystem.
2. Work procedure
Work shall be undertaken under acontrolled procedure so as to minimise therisk of aflammable
gas or vapour being present while thework is being performed.
3. General work area
All maintenance staff and others working in thelocal area shall be instructed on thenature
of work being carried out. Work in confined spaces shall be avoided. Thearea around
theworkspace shall be sectioned off. Ensure that theconditions within thearea have been made
safe by control of flammable material.
4. Checking for presence of refrigerant
Thearea shall be checked with anappropriate refrigerant detector prior to and during work,
to ensure thetechnician is aware of potentially flammable atmospheres. Ensure that theleak
detection equipment being used is suitable for use with flammable refrigerants, i.e. non-sparking,
adequately sealed or intrinsically safe.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CO/Tech MDDG-20DEN7-QA3 and is the answer not in the manual?

CO/Tech MDDG-20DEN7-QA3 Specifications

General IconGeneral
BrandCO/Tech
ModelMDDG-20DEN7-QA3
CategoryDehumidifier
LanguageEnglish

Related product manuals