9
ENGLISH
Buttons and functions
Top
1. Air outlet
2. Folding carry handle
3. [ Turbo ] Fan speed setting low/high
4. High fan speed: High fan speed is shown by theLED indicator.
5. [ Timer ] Enables automatic start/stop times to be set
6. On: TheLED indicator indicates that thetimer “on” function is activated.
Off: TheLED indicator indicates that theautomatic stop timer function is activated.
7. [ – ] Set thedesired humidity level and timer
8. Water Full: TheLED indicator turns on when thewater reservoir is full, not in place or not
fitted correctly.
9. Display
10. [ + ] Set thedesired humidity level and timer
11. [ Mode ] Select from:
- Normal dehumidification controlled by the desired humidity level setting.
- Continuous dehumidification with minimum fan speed, a desired humidity level cannot be set.
- Drying mode, dehumidification mode with maximum fan speed, a desired humidity level
cannot be set.
- Smart dehumidification mode, the product adapts automatically to the humidity level of the
room within the range of 45–55% depending on the temperature of the room. For example,
if the temperature of the room drops, the humidity automatically increases to a comfortable level.
12. Dryer: TheLED indicator turns on when you select dryer mode.
Cont: LED indicator turns on when continuous dehumidification mode is selected.
SMD: TheLED indicator turns on when smart dehumidification mode is selected.
13. LED indicator: Turns on when thedehumidifier is turned on.
14. [ Power ] On/Off
3 5 7 9 10 11 14
1
84 13
2
6
12
To Next Page
Loading...
Need help?
General
