To Next PageTo Next Page
Need help?Do you have a question about the Coban gps104 TK104 and is the answer not in the manual?
Lists key features like waterproof shell, large capacity battery, and magnetic mounting.
Describes uses for locating and tracking vehicles, cargo, and investigations.
Details the physical components and their locations on the device.
Describes the easy installation process using the built-in powerful magnet.
Explains how to switch between internal and external antennas.
Details the procedure for inserting the SIM card into the device.
Instructions for charging the device's battery using AC or car adapter.
Explains how to turn the tracker device on and off using the switch.
Describes the process of resetting the device to factory settings via SMS.
Instructions for changing the device's password using an SMS command.
Details how to add and remove authorized phone numbers for device control.
Explains how to get the current location of the tracker via SMS or by calling it.
Covers methods for continuous real-time tracking at set intervals.
Describes how the tracker updates its position based on vehicle turns.
Explains how to reduce GPS data inaccuracies during movement.
Instructions to obtain the tracker's location as a street address via SMS.
Describes using LBS for location when GPS signals are unavailable.
How to check the device's status like battery and GPS signal.
Procedure to retrieve the device's unique IMEI number via SMS.
How to set the device's local time and timezone using SMS.
Instructions for activating voice monitoring mode via SMS command.
Explains how the device logs tracking data and alerts to an SD card.
How to load logged tracking data to a monitoring platform via SMS.
Setting up the device to forward specific messages to other numbers.
How to inquire about account charges and forward carrier information.
Commands to disable the vehicle's engine and power remotely.
Command to restore the vehicle's oil supply after it has been cut off.
How to reset the tracker's GSM and GPS modules using an SMS command.
Options for putting the device into various power-saving sleep modes.
Set up a geo-fence to restrict the tracker's movements within a defined district.
Manage multiple defined areas for tracking and alerts, including setting and renaming.
Configure alerts for when the device moves beyond a specified radius.
Set up alerts for when the vehicle exceeds a predefined speed limit.
Triggers an alert when the tracker detects a severe impact or accident.
Alerts for vibrations detected by the built-in shock sensor, with adjustable sensitivity.
Emergency function activated by pressing the SOS button for location and help.
Notifies authorized numbers when the device's battery voltage is low.
Alerts when the external power supply to the tracker is cut off.
Notifies when the tracker loses GPS signal and provides last known location.
Instructions for setting the Access Point Name (APN) for GPRS connectivity.
Optional setup for GPRS login credentials if required by the network.
Configuring the IP address and port for GPRS communication.
How to switch the device's operating mode between SMS and GPRS.
Activate a mode to reduce GPRS data usage, especially when parked.
Information on accessing web and PC platforms for tracking and monitoring.
General
