Why does my Coban GPS not respond to SMS commands?
If your Coban GPS is not responding to SMS commands, it might be due to an incorrect password or an incorrect SMS command format. Ensure that you are using the correct password and that the SMS command is formatted properly.
What to do if my Coban 303FG GPS has no GSM signal?
If your Coban GPS tracker shows no GSM signal, ensure the SIM card is correctly inserted and is a GSM network SIM card. Also, verify that the SIM card's PIN code is disabled and call forwarding is not activated.
Why my Coban 303FG doesn't respond to calls or alarm notifications?
If your Coban GPS is not responding to calls or sending alarm notifications, the authorization number might be incorrect or not set. Ensure the authorization number is correctly configured.
How to fix Coban 303FG when it has no GPS signal?
If your Coban GPS unit isn't getting a GPS signal, make sure it's in a location where it can receive GPS signals without any obstructions.
How to fix a Coban 303FG GPS that fails to turn on?
If your Coban GPS fails to turn on, check if the power wiring is connected correctly.
What to do if Coban 303FG GPS fails to stop the engine?
If the Coban GPS is failing to stop the engine, verify that the engine stop wiring is connected correctly.
How to program the remote control for Coban 303FG?
If the remote control cannot be used with your Coban GPS, turn off the tracker and then turn it back on to program the remote control again.
Instructions for SIM card insertion and network band verification.
Setting working modes and intervals for location reporting.
Viewing historical track records recorded by the tracker.
Commands to stop or resume vehicle fuel and power supply.
Procedures for arming, silent arming, and disarming the device.
Details on door, ACC, and shock alarms when armed.
Low battery, power disconnection, SOS, and geo-fence alerts.
Alerts for unauthorized movement and exceeding speed limits.
Fuel status alerts and remote listening capability.
Using the remote for arming, disarming, SOS, and deterrence.
Changing password and authorizing contact numbers via SMS.
SMS commands for single tracking and positioning strategy.
Commands to remotely stop or resume vehicle functions via SMS.
SMS commands for activating and deactivating security modes.
SMS alerts for door, ACC, and shock alarms.
Managing low battery, power disconnection, SOS, movement, speed, and fuel alarms.
Configuring how often alarm notifications are sent.
Remote listening, ignition alerts, and SIM card balance checks via SMS.
Checking status, IMEI, setting time zone, and hardware reset commands.
Setting APN, username, and password for GPRS network access.
Configuring server IP/DNS, port, and switching SMS/GPRS modes.
Resetting to factory defaults and listing included accessories.
Safety guidelines and handling precautions for the tracker.
Solutions for common faults like power, signal, and command response problems.
To Next Page
General
