Coban 303FG - Advanced Alarm and Control Features; Movement and Speed Alarms; Fuel Alarm and Listen Function; Remote Controller Operations

7
8.6.5 Movement alarm
Draw a circle with the current location of the tracker as the center. Once the tracker exceeds the
radius, a movement alarm will be triggered.
8.6.6 Over speed alarm
After setting the speed value, an overspeed alarm will be triggered when the device speed exceeds
the set threshold.
8.6.7 Fuel alarm
When the vehicle's fuel consumption exceeds the normal standard while the vehicle is running, or
there is fuel leakage or fuel stealing when the vehicle is stopped, the GPS will trigger an oil theft and
oil leakage alarm, and the alarm horn will sound for 20 seconds.
8.7 Listen
Listen for 15 seconds per request
8.8 Other function settings
You can control the device to stop alarming, check sim card balance, reset the device, restore factory
settings, set shock sensitivity, authorization number, times of alarms, time zone, external power
on/off, Oil volume zero adjustment/full adjustment, smart angle updating settings, tracker password,
check device details, operation records, and installation information.
9 Remote controller
（
For G model
）
Key
Function
Descriptions
Arming
Press for 0.5 second, siren beep one time. If the vehicle is in the ignition
state, it cannot enter the armed state and the horn will not sound.
Disarming
Press for 0.5 second, siren beep 2 times. Stop all alarms.
Silent
arming
Press for 0.5 second when it is in disarm state, siren beep one time. In
silent mode, the siren will not sound even if an alarm is triggered.
DISARM will quit from silent mode.
SOS
Press for 3 seconds, Tracker will send SOS alert to authorized phone
numbers. Siren won’t sound.
Deterrence
Press for 0.5 second when it is in arm state, siren will beep 10 seconds,