Coban 303FG - Network and Initialization Settings; APN and GPRS Network Configuration; Server, Protocol, and Mode Settings; Initialization and Accessories

12
10.17 APN Setting
Command: apn+password+space+local apn, response: apn ok
Settings are only required when using the APP and web version
10.18 Configure user name and password of GPRS network
Command: up+password+space+user+space+Password, response: up ok
Settings are only required when using the APP and web version
10.19 Configure server IP/DNS and port
Command: adminip+password+space+IP/DNS+space+port, reponse: adminip ok
No setup required to use our BAANOOL IOT server,
10.20 TCP / UDP switch
Command: tcp+password, response: tcp ok
Command: udp+password, response: udp ok
No setup required to use our BAANOOL IOT server
10.21 SMS mode
Command: SMS+password, response: sms ok
The device default mode is GPRS mode, if user prefers to use SMS to manage device, please use this
command to close gprs mode
10.22 GPRS Mode
Command: gprs+password, response: gprs ok
10.23 Initialization
Command: begin+password, response: begin ok
All commands setting will return to default factory settings
11 Accessories
No.
Photo
Name
Specifications
Applicable
model
1
Harness
12PIN
Standard
2
Microphone
1.5m
Standard
3
Relay
12V/40A or 24V/40A
Standard