7
0505 882 448 | PIVOTEL.CO.NZ
Cobham IP handset
Cobham IP handset must be connected to a PoE adapter as the power source. Pivotel
supplies Cobham IP handset with PoE adapter. If you have your own Cobham IP handset,
please check with Pivotel to source the correct PoE adapter.
Connect your Cobham IP handset to the PoE port of the PoE adapter, and an Ethernet cable
from the LAN port of Sailor 4300 to the LAN port of the PoE adapter. The IP handset will be
automatically powered on when the terminal and PoE adapter are powered on.
If this is the first time the Cobham IP handset is connected to the Sailor 4300 terminal, a
new SIP profile needs to be added to the IP handset. This setup is only required to be setup
once.
To setup the Sailor 4300 profile on the Cobham IP handset, go to Menu – SIP – Option –
Add:
Name: enter SL4300
SIP server – Server name / IP: enter 172.16.0.1
SIP server – Server port: enter 5060
Username: enter line1 (no space between line and 1)
Password: leave blank
Codec priority: G711 (default)
STUN server: Not used (default)
Reregister every: 300 seconds (default)
Ensure SL4300 SIP profile is selected. When the SIP status becomes ‘Registered’, you can
make or receive calls. If the SIP registration failed, go to Menu – SIP and ensure SL4300
profile is selected.
To Next Page
Loading...
Need help?
General
