Need help?Do you have a question about the COBHAM Satcom SAILOR XTR GX-R2 and is the answer not in the manual?
General| Category | Marine Equipment |
|---|---|
| Manufacturer | COBHAM Satcom |
| Product Name | SAILOR XTR GX-R2 |
| Type | Maritime Satellite Terminal |
| Operating Temperature | -25°C to +55°C |
| IP Rating | IP66 |
| Data Rates | Up to 10 Mbps |
| Interface | Ethernet |
| Power Supply | AC 100-240V, 50-60Hz |
| Power Consumption | 150W typical |
| Compliance | CE, FCC |
Describes the SAILOR XTR GX-R2 system, its operation, and key features.
Lists available system models, part numbers, and optional accessories.
Details package contents, unpacking, and initial inspection procedures.
Discusses factors for optimal installation location, including obstructions and safety.
Step-by-step guide for installing the SAILOR 1000 XTR GX-R2 Above Deck Unit (ADU).
Step-by-step guide for installing the SAILOR 600 XTR GX-R2 Above Deck Unit (ADU).
Instructions for installing and grounding the Below Deck Unit (BDU).
Details the installation of the SAILOR GX-R2 Modem Unit (SMB3315).
Details the installation of the SAILOR GX Modem Unit (CX-751).
Describes how to integrate third-party IP devices into the antenna radome.
Outlines the procedure for powering up the system and its initial startup sequence.
Explains how to access and navigate the system's web interface for setup.
Covers configuration of VSAT profiles, network, navigation, and user administration.
Details software management, configurations, calibration, and troubleshooting procedures.
Describes the BDU display, keypad functions, and the menu structure.
Outlines the system's startup process and operational states.
Checklist to verify that the antenna installation is complete and correct.
Checklist for verifying BDU, connectors, and wiring installation.
Steps for performing functional tests in a harbor environment.
Explains the Built-In Test Equipment (BITE) and system status LEDs.
Provides initial checks and guidelines for resolving common system issues.
Instructions on how to return equipment for service or repair.
Detailed technical specifications for the SAILOR 1000 XTR GX-R2 system.
Detailed technical specifications for the SAILOR 600 XTR GX-R2 system.
Technical specifications for the SAILOR XTR BDU 7516A.
Provides dimensional drawings of the system components.
Overview of the features and benefits of the dual antenna solution.
Step-by-step guide for installing the dual antenna system.
Details on configuring the master and slave units for dual antenna operation.
Information about the splitter cable used in dual antenna setups.
Strategies to optimize performance when encountering signal blockage.
Configuration and operation of the dual modem feature.
Explains how to connect to the system via SSH or Telnet.
Lists and describes available commands for the Command Line Interface (CLI).
Explains the importance of proper grounding and RF protection.
Provides detailed guidelines and methods for proper system grounding.
Details regarding the jumper cable used for grounding connections.
Explains how the system detects, displays, and manages events.
A comprehensive list of system event IDs, types, descriptions, and explanations.
Visual representation of the Inmarsat GX service coverage area.
Declaration of conformity with European Union Radio Equipment Directive.
Inmarsat type approval certificate for the SAILOR 1000 XTR GX-R2.
Compliance statement regarding hazardous substances in China.
To Next Page
