COBHAM Satcom SAILOR XTR GX-R2 User Manual

98-175666-D F-1
Appendix F
Event messages F
F.1 Overview
The SAILOR XTR GX-R2 detects events during
• POST (Power On Self Test) – a self test performed at every power-up.
• Self test – started in the web interface
• CM (Continuous Monitoring) – automatically performed while the system is in
operation.
When the SAILOR XTR GX-R2 detects an event that requires your action, it issues an
event message and the red Fail/Pass LED in the LED panel of the BDU is lit. As long as
an event is active, it is shown in the BDU display and the web interface (in Service >
Events or click the event icon in the top bar.
State the Event ID when contacting your service partner.
The event description might contain a number of digits in brackets, e.g. (00000005).
This is supplemental information and used for service and diagnostics purposes.
Some of the messages may not be relevant for the antenna described in this manual.
Note
Active events and notifications are shown. As soon as the event is cleared,
it is not displayed any longer. It is then moved to the section Cleared
events last 24 hours.

COBHAM Satcom SAILOR XTR GX-R2 Specifications

General

Brand	COBHAM
Model	Satcom SAILOR XTR GX-R2
Category	Marine Equipment
Language	English