COBHAM Sea Tel 120 TVHD User Manual

Field Installation & Test Procedure, 4 Switch Dual Antenna Arbitrator
Panel Assembly, Sea Tel TV
Page i
Document No
99-145228-A2
Copyright © Sea Tel, Inc 2015 The information contained in this document is proprietary to Sea
Tel, Inc.. This document may not be reproduced or distributed in any form without prior written
consent of Sea Tel, Inc.
Form 99-144368-A
Approval:
Approval Routing
Position
Approving Authority
(Electronic Signature)
Product Manager Bobby Johns
Author Mike Needham
QMS Control: NONE
Revision History
Rev.
DCO
Description of Change
Date
A
Release of Document. Approval history is stored in Agile.
02/10/15
A1 Clerical changes. 06/18/15
A2 Clerical Changes after review 07/02/15

COBHAM Sea Tel 120 TVHD Specifications

General

Type	Marine Satellite TV Antenna
Frequency Range	10.7 - 12.75 GHz
Frequency Band	Ku-band
Polarization	Linear
Tracking	Automatic
Stabilization	3-axis
Azimuth Range	Unlimited
Tracking Accuracy	0.2° RMS
Antenna Diameter	120 cm
Compatibility	DVB-S2
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	300 W

Summary

Field Installation & Test Procedure for 4 Switch Dual Antenna Arbitrator

1.1 Dual Antenna Configuration

Explains the purpose of dual antenna setup for uninterrupted TV service.

1.2 Installing the Antennas

Details mounting and alignment of dual antennas for optimal performance.

1.3 Blockage Zone Plotting

How to program blockage zones into the LMXP for automatic signal routing.

1.4 4 Switch Dual Antenna Arbitrator Panel Assembly

Introduces the specific panel assembly and its role in signal distribution.

1.5 Install the Dual Antenna Arbitrator Panel

Step-by-step instructions for installing the arbitrator panel and connecting wires.

1.6 Setup of the LMXP's

Guide to configuring the LMXP settings for the dual antenna system.

1.7 Testing the Dual Antenna System

Procedures for verifying the functionality of the dual antenna arbitrator system.