How to fix COBHAM Transceiver if the system cannot be switched on?
If your COBHAM Transceiver SAILOR 6018 won't switch on, it could be due to a remote on/off switch being used. In this case, use the remote switch instead of the power button. Alternatively, check that all power cables between the ship power source and the SAILOR 6018 are correctly connected and that the power source is active.
What to do if there is no signal from the satellite on COBHAM Transceiver?
If you're experiencing a weak or absent signal from the satellite on your COBHAM Transceiver, first ensure that the SAILOR 3027 has an unobstructed view in all directions. If the view is clear, the issue might be that the system is configured for a specific satellite but is currently outside that satellite's coverage area. Try logging into a satellite that covers your current location.
What to do if COBHAM Transceiver SAILOR 6018 cannot switch off?
If your COBHAM Transceiver SAILOR 6018 won't switch off, it might be due to a software error. To resolve this, try pushing and holding the Power button for 10 seconds, or reboot the device by disconnecting and reconnecting the power cable.
How to fix no connection between SAILOR 6018 and SAILOR 3027 on COBHAM Transceiver?
If there is no connection between the SAILOR 6018 and SAILOR 3027 on your COBHAM Transceiver, the CAN cables might be damaged or improperly connected. Ensure the CAN cables are correctly connected and inspect them and their connectors for any damage.
Why is there no battery information in the SAILOR 6018 COBHAM Transceiver?
If your COBHAM Transceiver SAILOR 6018 is not displaying battery information, the Ethernet connection from the power supply might be faulty. Check the Link activity indicator at the connection points in the Ethernet switch, and ensure that the Ethernet cables are correctly connected and undamaged.
What to do if there is no connection between SAILOR 6018 and printer on COBHAM Transceiver?
If your COBHAM Transceiver SAILOR 6018 has no connection to the printer, the USB cable could be the issue. Check that the USB cable is correctly connected and is not damaged.
Why does COBHAM Transceiver SAILOR 6018 show “PR Out Paper” when there is paper?
If your COBHAM Transceiver SAILOR 6018 displays “PR Out Paper” even when the printer has paper, the paper might not be positioned correctly. Adjust the paper to the left side of the printer.
How to fix units in SAILOR 6110 not appearing in TMA for COBHAM Transceiver?
If the units in the SAILOR 6110 aren't showing up in the TMA (ThraneLINK Management Application) for your COBHAM Transceiver, the computer running the TMA might have a fixed IP address that doesn't match the local network with the SAILOR 6110 units. Enable DHCP on your computer. If you need to have a fixed IP address on your computer, there must be a DHCP server in the network, and the IP address of your computer must be within the range provided by the DHCP server.
General| Brand | COBHAM |
|---|---|
| Model | SAILOR 6110 mini-C GMDSS |
| Category | Marine Equipment |
| Language | English |
Introduction to the SAILOR 6110 mini-C GMDSS system and its purpose.
Explanation of the GMDSS system and the SAILOR 6110's role within it.
Details on the individual components that make up the SAILOR 6110 system.
Description of the main user interface on the SAILOR 6018 Message Terminal.
Overview of the various services provided by the Inmarsat C satellite system.
Procedure for registering the SAILOR 3027 GMDSS Terminal with the Inmarsat-C system.
Steps for initial setup and configuration of the SAILOR 6110 system.
Instructions for powering on and starting the SAILOR 6110 system correctly.
How to send a Distress alert using the SAILOR 6110 system's dedicated button.
Description of the SAILOR 6018 Message Terminal's features, buttons, and display.
Diagram and explanation of the SAILOR 6110 system's menu structure.
Procedures for writing, sending, receiving, and managing messages within the system.
How to view and manage incoming Enhanced Group Calls (EGCs) in the system.
Instructions for printing, saving, or deleting EGCs and messages from the system.
How to check the system's network connection status and login information.
Procedures for adding, editing, and deleting contacts in the system's contact list.
Information on the system's backup battery status and related settings.
How to view detailed information about system units, serial numbers, and software versions.
Settings for regional preferences, date/time format, and display night mode.
Procedure to enter NMEA commissioning mode for system installation purposes.
Configuration options for Distress alerts, including nature, LES, and position.
Settings for receiving, printing, and managing Enhanced Group Calls (EGCs).
Configuration options for automatic message printing based on message type.
Settings related to Network ID, DNIDs, and data reporting configurations.
How to view the current position, course, and speed of the vessel.
Procedure to test the functionality of the system's Distress buttons.
Guide to operating and understanding the SAILOR H1252B Printer's functions.
Guidance on obtaining technical support, troubleshooting, and generating diagnostic reports.
Table of common problems, their possible causes, and recommended solutions.
Explanation of system status indicators, event messages, and icons.
List of all possible alerts with BAM IDs, priorities, categories, and descriptions.
Information on contacting support for service, repair, and product shipment.
Official declaration of the product's compliance with relevant directives and standards.
Details of the terms and conditions for copying, distribution, and modification of the GPL.
Details of the terms and conditions for copying, distribution, and modification of the LGPL.
To Next Page
