COBHAM Satcom SAILOR XTR GX-R2 User Manual

Service
98-175666-D Chapter 3: Setup of the antenna 3-31
3.3 Service
3.3.1 Software
In this section you can manage software versions, upload and save configurations and
reset the SAILOR XTR GX-R2 to factory default.
Upload
The following items are required before the software can be updated:
• One computer with a standard Ethernet port available.
• A standard Internet browser.
• One straight LAN cable.
• The file with the new software.
1. Power up the SAILOR XTR GX-R2 system, i.e. switch on the BDU. Wait until the text
INITIALISING has disappeared from the BDU display.
2. Connect a PC to the front LAN connector of the BDU.
3. Open your Internet browser and enter the IP address of the BDU. The IP address is
http://192.168.0.1 (default).
4. Type in the user name (admin or guest) and password.
Figure 3-23: Service - Software
Note
Only qualified service personnel should make a software
update.

COBHAM Satcom SAILOR XTR GX-R2 Specifications

General

Brand	COBHAM
Model	Satcom SAILOR XTR GX-R2
Category	Marine Equipment
Language	English