Chapter 2: Operation
40 Setup
Power Supply
DSC setup
US. Channels As described above.
CA. Channels As described above.
ALT. Channels As described above.
Private
Channels
As described above.
Paramete
r
Description
Monitor Set this to ENABLED if the radio is connected to a SAILOR 6081
Power Supply and Charger.
Set this to DISABLED for any other power supply.
Status Visible if ENABLED. Current status of the connected power supply.
Voltage Visible if ENABLED. Current voltage.
Current Visible if ENABLED. Current current.
Parameter Description
DSC setting Description
Position &
MMSI
Available position information.
Here you can enter position data and UTC time manually.
See also Position and MMSI number on page 10 for a
step-by-step description.
DSC Groups Shows DSC groups. You can also add, edit, filter and delete
groups here.
To Next Page
