Chapter 2: Operation
Setup 43
22222
Operation
Language English
Theme Changes the display colour.
BlackOnWhite (default)
WhiteOnBlack
NMEA input (baud
rate)
4800 (cannot be edited)
GPS input Changes the GPS input.
NMEA use if the GPS input is from the ACC
connector.
LAN use if the GPS input is from the LAN connector.
Factory Defaults Resets the radio to factory defaults. Press the
selector knob and confirm the reset to factory
default.
Radio Info: SW Version: Software version of the radio
S/N: Serial number of the radio
IP: IP address of the radio
Password If you need to change the identity of the radio
(MMSI number or ATIS code), contact your local
dealer.
SYSTEM SETUP Description
To Next Page
