Chapter 3: Service & maintenance
Service and repair 61
33333
Service & maintenance
The shipping carton has been carefully designed to protect the SAILOR
6282 AIS Transponder and its accessories during shipment. This carton and
its associated packing material should be used when repacking for
shipment. Attach a tag indicating the type of service required, return
address, part number and full serial number. Mark the carton FRAGILE to
ensure careful handling.
If the original shipping carton is not available, the following general
instructions should be used for repacking with commercially available
material.
1. Wrap the defective unit in heavy paper or plastic. Attach a tag
indicating the type of service required, return address, part number and
full serial number.
2. Use a strong shipping container, e.g. a double walled carton.
3. Protect the front- and rear panel with cardboard and insert a layer of
shock-absorbing material between all surfaces of the equipment and the
sides of the container.
4. Seal the shipping container securely.
5. Mark the shipping container FRAGILE to ensure careful handling.
Failure to do so may invalidate the warranty.
Note
Correct shipment is the customer’s own responsibility.
To Next Page
Loading...
