EasyManua.ls Logo

COBIA 344 CC - Electric Head Discharge Options; Waste Management System

Default Icon
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Model Year 2016 page !12
Maverick Boat Company, Inc. • 3207 Industrial 29th St. • Fort Pierce,
Florida 34946 • (772)-465-0631 or (888)-shallow • Fax: (772) 489-2168
ELECTRIC HEAD (CONT.)
Electric Head Continued
The Jabsco Y-Valve is designed to provide flexibility of onboard
waste management by diverting waste either to the dockside pump-
out fitting or directly overboard where legal to do so. Check local
and Federal regulations to determine where direct overboard
discharge of untreated waste is permitted.
Some near shore areas and inland areas are designated as "No-
Discharge Zones" where the discharge of any onboard waste, even
treated waste is strictly prohibited. Many of these areas require a
waste retention system that can be positively secured in an
onboard retention mode.
The Jabsco Y- Valve accommodates this requirement by providing
the ability to add a padlock that secures the selector handle in
either direction to ensure waste is directed to an onboard holding
tank. The Y-Valve may also be used to direct waste from a holding tank
to a waste deck plate for removal by a dockside pump-out facility.
Toilet & Macerator Switch Located on the
Starboard Aft Wall of the Console
Macerator Used for Pumping Direct
Overboard Discharge
Y-Valve Used to Direct Waste Discharge

Related product manuals