USER MANUAL
12
DST
DST stands for Daylight Savings Time.
DST
:
Enable it if Daylight Saving Time (DST) is observed in your region.
Time Offset
:
Select the amount of time to offset for DST.
Time Mode
:
Choose to set the daylight saving time in weeks or in day.
Start Time/End Time
:
Set the start time and end time for daylight saving.
3.1.4 Disk
If the HDD is installed in the WIRELESS NVR for the first time, it must be formatted. Select the HDD
and then click
Format HDD
button to format the HDD.
Overwrite
: Use this option to overwrite the old recordings on the HDD when the HDD is full. For
example, if you choose the option 7 days, then only the last 7 days recordings are kept on the HDD. To
prevent overwriting any old recordings, please select Disable. If you have disabled this function, please
check the HDD status regularly, to make sure the HDD is not full.
To Next Page
Loading...
