USER MANUAL
31
4.3
Alarm
Configure the alarm parameters
.
4.3.1
Motion
Channel
: Channel name.
Buzzer
: The NVR can use its internal buzzer to sound an alarm. You can set the buzzer duration in
seconds when motion is detected.
Record
: Click icon to choose which channel to be recorded when the motion detection is
triggered.
Post Recording
: You can set the duration of the NVR's continuous recording after the event occurs.
The recommended recording time is 30 seconds, but it can be set to a maximum of 5 minutes.
Show Message
: Check this box to display the icon on the live view display screen when motion is
detected.
Send Email
: You can have the NVR automatically send you an email when it detects motion.
FTP Picture Upload
: After the alarm is triggered, upload the alarm picture to the FTP server. View
more on 4.4.4 FTP.
To Next Page
Loading...
