USER MANUAL
44
4. 5 Device
In this section, you can configure the internal HDD and Cloud function.
4.5.1 Disk
4.5.1.1 Disk
This menu allows you to check & configure the internal HDD(s). You need to format the HDD only at the
first startup and if you replace a new HDD
Format HDD:
Select the HDD you want to format and then click
Format HDD
. To start formatting, you
need to enter your user name and password and then click
OK
to confirm to continue formatting.
Overwrite:
Use this option to overwrite the old recordings on the HDD when the HDD is full. For
example, if you choose the option 7 days then only the last 7 days recordings are kept on the HDD. To
prevent overwriting any old recordings, select
OFF
. If you have disabled this function, please check the
HDD status regularly, to make sure the HDD is not full. Recording will be stopped if HDD is full.
To Next Page
Loading...
