USER MANUAL
39
4.4.3.1 Email Configuration
Email
: Check to enable.
Encryption
: Please enable it if your email server requires the SSL or TLS verification. If you are not
sure, please set to
Auto
.
SMTP Port
: Enter the SMTP port of your email server.
SMTP Server:
Enter the SMTP server address of your email.
User Name
: Enter your email address.
Password
: Enter the password of your email.
Receiver 1~3
: Enter the email address that you want to receive the event notifications from the
WIRELESS NVR.
Interval
: Configure the length of the time interval between the notification emails from the WIRELESS
NVR.
To make sure all settings are correct, click
Test Email
. The system will send an email to your inbox. If
you received the test email, it means the configuration parameters are correct.
To Next Page
Loading...
