USER MANUAL
50
Week:
Select the month, a particular week and time when Daylight Saving starts and ends. For
example, 2:00 a.m. on the first Sunday of a particular month.
Date:
Select the start date (click the calendar icon ), end date and time when Daylight Saving
starts and ends.
Start Time / End Time
: Set the start time and end time for Daylight Saving.
4.6.1.3 Output Configuration
This menu allows you to configure video output parameters.
Select
LIVE-OUT
mode in the Video Output drop-down menu.
VGA/HDMI Resolution
: Select a display resolution that is suitable for your TV. 1920 x 1080 will suit
most TVs. If your WIRELESS NVR supports 4K output resolution, you can select either 2K (2560 x
1440) or 4K (3840 x 2160) to adapt to higher resolution monitors.
Scale And Offset
: The WIRELESS NVR supports to adjust the size & position of the display screen to
match your monitor or TV. Click
Setup
button to adjust.
To Next Page
Loading...
