USER MANUAL
59
4.7.3.4 Parameter Management
You can export the main menu settings you have configured to a USB flash drive, or import an exported
setting file from USB flash drive to the WIRELESS NVR.
。
Save Settings
: Click to save the WIRELESS NVR current system settings to the USB device. You will
be required to input the Admin password to authenticate.
Load Settings
: Once you have created a system settings export file, you can import the settings on
another NVR. Click
Load Settings
button to pop up the USB flash driver menu and select the
parameter file. You will be required to input the Admin password to authenticate.
To Next Page
Loading...
