10 | P a g e
INITIAL SETUP
When the Dash Cam is powered on for the first time it will ask you to enter basic setup
information.
You will be asked to set the Year, Month, Day, Time Zone, Daylight Saving Time, and Time. This
information is needed so that file names will be created correctly and time stamps will be
accurate in your videos.
On subsequent startups the unit will proceed directly to the Video Screen
LED FUNCTIONALITY
The LED Indicator, located near the top left of the screen, communicates power and recording
status even if the screen is off. LED operation is detailed in the table below:
To Next Page
Loading...
Need help?
General
