About Tracks and Routes
You can select two or more waypoints
to create a route . Your GPS 100
will show you the way to follow the
route accurately.
You can also create and store up to 10
tracks . Your GPS 100 automatically
keeps a record of your progress as you
travel and gives you a graphic representation
of the track you have taken. You also can
make the unit guide you in the reverse
direction along the same track.
Clearing the Track Log
The GPS 100 has 2000 active track log
points available to you. Once the track log is
full, no additional tracks can be stored until
the log is cleared. To clear the track log:
1. From the Nav Data page, highlight using
the ZOOM IN/OUT button and select
TRACKS by pressing the ENTER button to
display the tracks screen .
2. Highlight and select CLEAR to
clear the log of all travel that has been
recorded. The unit automatically restarts
recording your travel.
3. Press the PAGE button to return to
the main page.
4
TRACKS & ROUTES
Tracks Route
Clear Log
Select Clear
PAGE Button
To Next Page
Loading...
Need help?
General
