Your MicroTalk will stay in the subchannel
section until you:
Push and hold button to set memory
location and stay in memory scan.
or...
Push and release button to return to
operational mode.
or...
Push and release button to proceed to
next function mode (Scan).
Advanced Features
27
Note
If you push and hold the
button,the LCD display will
cycle through the different
functions.
A
B
C
Advanced Features
26
Programming Memory Locations continued
Programming
Memory
Locations
Push and release button which sets main
channel in memory and moves to subchannel
selection. The subchannel begins flashing.
The icon will remain flashing.
6
Select desired subchannel you wish to store
(00-38) by pushing and releasing
buttons.(Use SUBCHANNEL 38 for this
example.)
7
Note
Push and hold the
buttons for fast channel
advance.
Note
You can push and hold the
b u t ton to begin talki n g
a n y t i m e.
310WX.MANUAL.qx copy 6/17/99 12:18 PM Page 26
To Next Page
Loading...
