Cobra MicroTalk - Ringer;Vibrate Modes

Push and release buttons until icon
appears for ringer mode.
Advanced Features
39
3
continued
Advanced Features
38
Ringer/Vibrate Modes
Your Microtalk will signal you that there is an
incoming transmission with either a tone or a
vibration or both.To set for Ringer/Vibrate:
Rotate ON - OFF Volume Control clockwise.
An audible “tone”will indicate the unit is on and
then the LCD will go through a 3 second self-test
and then go to operational mode.
Ringer/Vibrate
Modes
Push and release button until icon
flashes.
2
1
310WX.MANUAL.qx copy 6/17/99 12:18 PM Page 38