Parking Mode:
Enabling Parking Mode allows your camera to monitor for changes in its internal G-
Sensor/accelerometer. Bumps, Collisions, and break-ins can trigger the G-Sensor to save
valuable footage from the moment of impact. If leaving your vehicle off for more than 48 hours
(or less if your battery is old) please use the “Auto Surveillance Shutoff” setting to set a time-
limit on Motion Detection and prevent your battery from being drained.
Note: For Parking Mode to work the camera needs to be connected via hardwire kit (part: CA-
MICROUSB-001) or be plugged into an ‘always on’ Cigarette Lighter Socket. You can check if your
vehicle has an ‘always on’ CLA adapter online or in the vehicle’s owner’s manual.
Surveillance Auto Shutoff:
If leaving your vehicle off for more than 48 hours (or less if your battery is old) please use the
“Auto Surveillance Shutoff” setting to set a time-limit on Motion Detection and Parking Mode to
prevent your battery from being drained.
G-Sensor:
You can use this setting to set the sensitivity of the G-Sensor from 1-3 or turn it off. Level 1 is the
easiest to activate the G-sensor. Level 3 is the setting which will only lock videos when the most
severe impacts are detected. Level 1 is recommended for most users.
Watermark (Date/Time, Speed, GPS, Driver ID Video Stamp
The watermark settings allow you to toggle having the date/time, speed, GPS coordinates, the
Cobra logo and a custom Driver ID be stamped into the bottom of all recorded video.
Driver ID Watermark:
This setting allows you to associate a Driver ID with the camera (for example: John, Employee 12,
etc). This allows you to set the name of the driver which will be stamped on the footage as part of
the watermark.
Exposure:
Allows you to adjust how light or dark videos and images will appear on the camera.
Language:
This setting allows you to pick the on-screen language for the unit.
iRadar Network Alerts:
This setting allows the user to program real-time driver alerts acquired from the iRadar network.
Here you can choose to have the camera make a voice announcement when there is a red-light
camera or speed-camera ahead. You can also choose to turn notifications from the unit off
completely and simply follow along using the iRadar App.
To Next Page
