Cobra XRS 9940

Windshield Mounting
1. Attach the rubber
cups to the bracket.
6. Plug the power cord
into the detector.
7. Plug the cigarette lighter
adapter on the power
cord into your vehicle's
cigarette lighter.
; 2. Make sure the rubber cups and your windshield are clean.
: 3. Push the bracket firmly
,
onto the windshield.
, 4. Attach the detector to
the bracket. Check that
the unit is parallel to
the road's surface.
----------
: 5. To adjust the angle if
necessary, gently push or
pull on the bracket to bend
it. DO NOT use the detector
to bend the bracket.
; 8. You can temporarily remove the detector whenever you
wish by depressing the bracket release button and sliding
it off the bracket.
o English