Cobra XRS 9940

Dashboard Mounting
, 1. Place the detector on the dashboard to find a location
where the unit has a clear view of the road and is parallel
to the road's surface. The angle CANNOT be adjusted
after mounting.
I 2. Remove the paper backing
from one side of the hook-
and-loop fastener.
I 3. Attach the pad to the
I dashboard at your chosen
location and remove the
other paper backing.
: 5. Plug the power cord
I into the detector.
r---- ---------
! 6. Plug the cigarette lighter
! adapter on the power
cord into your vehicle's
cigarette lighter.
!
-_._------~- ---,---~
!
I
Nothing Comes Close to a Cobrcf' 0