Coby MP620 Series - Player Reset and Control Lock; Resetting the Player; Disabling the Controls (Hold)

Page 8 Getting Started
English
Resetting the Player
Reset the player if it should freeze and not respond
or otherwise malfunction.
Disconnect your player if it is connected to a 1.
computer.
Use a paper clip to gently press the <RESET> 2.
button located on the rear of the player.
Disabling the Controls (Hold)
When the <POWER> switch is set to the “Hold”
position, your player’s controls are disabled.
You may want to disable the controls to avoid
turning on the player or activating the controls
accidentally when it is in your pocket or bag.
To disable the controls, slide the <POWER> 
switch up until it clicks into the “Hold” position.
To enable the controls, slide the <POWER> switch 
down to release it from the “Hold” position.
A lock icon will appear on the screen when
the controls are disabled. Re-enable the
controls to continue.