TROUBLESHOOTING
There is no sound or distorted sound.
• Ensure that the TV and amplifier have been turned on and properly set up.
• Try a different Audio track of the DVD by pressing AUDIO.
• Ensure that the MUTE function of the TV, Amplifier, or Player is not engaged.
The remote control doesn’t work.
• Ensure that the FUNCTION switch has been set to one of the "On" positions (i.e., VIDEO or RADIO).
• Ensure that there are no obstacles between the remote and the player.
• Point the remote at the remote sensor on the main unit.
• Ensure that the batteries in the remote retain a charge and have been installed correctly.
• Try replacing the remote’s batteries.
The player has malfunctioned.
• Unplug the player. After 30 minutes, plug in and power on the player -- the restore function should
reset the player.
To Next Page
Loading...
