Coby TFTV791 - Getting Started and Basic Controls; Initial TV Setup Guide; Setting TV Mode; Performing a Channel Scan

Page 17 Getting Started
English
Getting Started Â
Using the TV for the First Time
After charging the battery and making all necessary
connections, set the Power switch to the ON posi-
tion to turn the TV on.
All instructions given refer to the remote control.
Step 1: Set the unit to TV mode.
Press 1. . The Input Source menu will appear.
Use the navigation keypad (2.
or ) to
choose “TV”.
Press 3.
.
Step 2: Perform a channel scan.
Perform a scan to nd channels that are within
range of reception.
Press 1.
. The System menu will appear.
Press 2.
once to display the Channel options.
Press 3.
twice to choose the Auto Scan option.
Press 4.
once, then press to start the
channel scan.
You may need to perform a channel scan
again if you change the location of the TV.