Cochlear Mini Microphone 2 - Step 1: Pair your Phone Clip; Pair your sound processor

Step 1: Pair your Phone Clip
You first need to pair your Phone Clip with your sound processor(s), so
they can communicate.
Step 1a: Pair your sound processor to the Phone Clip:
1. Remove your sound processor(s).
2. Turn OFF your sound processor(s).
3. Turn ON your Phone Clip. The LED on top of the Phone Clip
flashes green when it is turned on.
4. Remove the silver cover from the base of the Phone Clip by sliding
it downwards.
5. Use a pen to press the white pairing button on the back of your
Phone Clip. You now have 20 seconds to turn on your processor(s)
in order to pair it with the Phone Clip.
ON
Light indicator
(LED)
NOTE
If you use a compatible GN ReSound hearing aid
on one side and a cochlear implant on the other,
pair the hearing aid first, then the cochlear
implant, in the same Phone Clip pairing window.
Sound processor
pairing button
© Cochlear Limited 2015 True Wireless Accessories - 29
Phone Clip