40 NUCLEUS 7 SOUND PROCESSOR USER GUIDE
Battery charger care
Every day
• Check your battery charger is clean. If you notice any
dust or dirt:
1. Disconnect the battery charger from the power source
and remove any battery modules.
2. Hold the battery charger upside down and tap it gently
to remove any dirt from the battery charger sockets.
Carefully blowing on the sockets may also help remove
dirt.
3. Wipe the battery charger sockets with a soft dry cloth.
• (Y Battery Charger) Use a different charger socket each
time you charge to wear the sockets evenly.
If it gets wet
• If the battery charger ever gets splashed with liquid,
carefully shake out the liquid and dry the battery
charger for 24 hours. Do not use the battery charger
until it is dry.
To Next Page
Loading...
