Cochlear Nucleus 7 - Change the Coil

46 NUCLEUS 7 SOUND PROCESSOR USER GUIDE
Change the coil
The Cochlear Slimline
™
Coil comes in four cable lengths (6,
8, 11 and 25 cm) so you can choose the most comfortable
fit.
You might also need to change to a different cable length
to use some retention accessories (e.g. Koala Clip).
NOTE
Only remove the coil from your sound processor when
necessary.
1. Hold the coil cable grip and
firmly pull it straight out of
the processor.
Do not pull on the flexible
part of the coil cable.
CAUTION
Do not twist the coil cable
when you pull it out of the
processor.
2. Push the new coil cable into
the processor until it clicks
into place.
Do not twist.